Last Chance Black Friday Deal: Take 75% Off! Use coupon code below to secure your exam bundles! - Ends in 0d 00h 00m 00s - Coupon code: my75ex

Home > UiPath > UiPath Certified Professional - Infrastructure Engineer > UiPath-IEPASv1

UiPath-IEPASv1 UiPath Certified Professional Infrastructure Engineer Professional - Automation Suite Question and Answers

Question # 4

Which of the following actions is required when carrying out a parallel Automation Suite upgrade?

A.

Regenerate the cluster_config.json file.

B.

Migrate the data to the new cluster.

C.

Configure cluster backup.

D.

Put the cluster in maintenance mode.

Full Access
Question # 5

How can a system administrator obtain the host admin password to access the Host portal in Automation Suite?

A.

By using the command kubectl get secrets/platform-service-secrets -n uipath -o “jsonpath= {.data[‘identity.hostAdminPassword’]}” | base64 -d ; echo

B.

By logging in to the default organization and resetting the password manually

C.

By running helm status automation-suite in the terminal

D.

By checking the email sent during installation

Full Access
Question # 6

When installing Automation Suite with Azure, AWS, or GCP templates, what must you do regarding RPM packages?

A.

Validate RPM packages.

B.

Manually install RPM packages.

C.

No action is needed.

D.

Download RPM packages.

Full Access
Question # 7

While deploying an Automation Suite node, the installer reports that one mount point is absent from fstab. Which command lists the entire contents of the fstab file?

A.

cat /etc/fstab

B.

touch /etc/fstab

C.

echo /etc/fstab

D.

ls /etc/fstab

Full Access
Question # 8

Which command can you run to check the availability of the nodes?

A.

kubectl get nodes

B.

kubectl list nodes

C.

kubectl verify nodes

D.

kubectl check nodes

Full Access
Question # 9

Is deploying UiPath Automation Suite on AMD processors supported?

A.

Support is limited to virtualized environments.

B.

Only Intel processors are supported.

C.

Both AMD and Intel processors are supported if architecture requirements are met.

D.

Only specific AMD models are supported.

Full Access
Question # 10

Which syntax correctly enables snapshot backup every 55 minutes?

A.

./configureUiPathAS.sh snapshot config -s “/50***” -r “50m” -t nfs -e -l “/asbackup” --prefix “schedule”

B.

./configureUiPathAS.sh snapshot config -s “/50***” -r “55h” -t nfs -e -l “/asbackup” --prefix “schedule”

C.

./configureUiPathAS.sh snapshot config -s “/50***” -r “55m” -t nfs -e -l “/asbackup” --prefix “schedule”

D.

./configureUiPathAS.sh snapshot config -s “/55***” -r “50h” -t nfs -e -l “/asbackup” --prefix “schedule”

Full Access
Question # 11

What root-volume capacity is required for both EKS and AKS agent (worker) nodes?

A.

minimum 20 GB

B.

minimum 50 GB

C.

minimum 150 GB

D.

minimum 256 GB

Full Access
Question # 12

Which of the following is identified as a mandatory prerequisite for the OpenShift cluster before installing Automation Suite?

A.

A default storage class that supports ReadWriteMany (RWX) access mode.

B.

Internet connectivity for all nodes during runtime.

C.

A pre-configured Prometheus instance.

D.

At least 10 worker nodes.

Full Access
Question # 13

Which command starts the Automation Suite installation after the prerequisites have been validated?

A.

uipathctl manifest apply input.json --versions versions.json

B.

uipathctl install start input.json

C.

uipathctl deploy suite --run input.json

D.

uipathctl apply manifest --config input.json

Full Access
Question # 14

Can the secondary cluster be switched off when it is not being used in an Active-Passive deployment?

A.

Yes, completely.

B.

Yes, but only for maintenance.

C.

Only partially.

D.

No.

Full Access
Question # 15

After updating the input.json file to enable or disable products in UiPath Automation Suite for AKS/EKS/OpenShift, which command should you run to apply the updated configuration to the cluster?

A.

uipathctl deploy --config input.json

B.

uipathctl config apply input.json

C.

uipathctl update cluster --config input.json

D.

uipathctl manifest apply input.json --versions versions.json

Full Access
Question # 16

Which of the following is a consideration for implementing a backup mechanism in Automation Suite?

A.

The NFS server must be reachable from all the cluster nodes.

B.

The NFS server must be set up on the first server machine.

C.

The cluster you want to backup and the NFS server must be in different regions.

D.

It is not mandatory to set up an external NFS on Linux.

Full Access
Question # 17

At which stage of the Automation Suite deployment can you select either the online or offline deployment method?

A.

From ArgoCD after installation.

B.

After executing the prereq run command to validate the prerequisites required by the shared components installation.

C.

After installing the infrastructure on the first server machine.

D.

During the cluster_config.json generation or by editing the cluster_config.json before installation.

Full Access
Question # 18

What is the main purpose of a single-node deployment in Automation Suite?

A.

High Availability configurations.

B.

Production use.

C.

Evaluation and demo scenarios.

D.

Data-intensive applications.

Full Access
Question # 19

What minimum hardware specifications are recommended for a Microsoft SQL Server that hosts Automation Suite databases?

A.

4 vCPU, 16 GB RAM, 128 GB SSD

B.

6 vCPU, 24 GB RAM, 200 GB SSD

C.

8 vCPU, 32 GB RAM, 256 GB SSD

D.

10 vCPU, 40 GB RAM, 512 GB SSD

Full Access
Question # 20

What action should be taken if the Automation Suite Platform upgrade process fails?

A.

Exit maintenance mode, uninstall the rke2-server service, and rerun the installer.

B.

Follow the rollback procedure to the previously installed version using the backup and restore capability.

C.

Exit maintenance mode, reboot the VM, and restart rke2-server service.

D.

Reboot the VM, delete and rejoin the nodes to the cluster.

Full Access
Question # 21

Which command correctly performs an in-place upgrade of Kubernetes and the other infrastructure components?

A.

./bin/uipathctl rke2 upgrade cluster_config.json --versions versions/helm-charts.json

B.

./install-uipath.sh --upgrade -i ./cluster_config.json -o ./output.json -k --accept-license-agreement

C.

./bin/uipathctl manifest apply cluster_config.json --versions versions/helm-charts.json

D.

./configureUiPathAS.sh --upgrade -i ./cluster_config.json -o ./output.json -j server --accept-license-agreement

Full Access
Question # 22

In a multi-node HA-ready production deployment, is the number of agent nodes fixed or optional?

A.

Fixed.

B.

Determined by the number of server nodes.

C.

Must be equal to the number of server nodes.

D.

Optional and based on actual usage.

Full Access
Question # 23

What is a critical latency requirement for Active/Active configurations?

A.

Round trip latency must be under 10ms.

B.

Round trip latency must be under 20ms.

C.

Round trip latency must be under 30ms.

D.

Round trip latency must be under 120ms.

Full Access
Question # 24

In the context of Automation Suite Platform, how is a server node defined?

A.

A server node runs the UiPath products and shared components only.

B.

A server node hosts cluster management services that perform important cluster operations, such as workload orchestration, cluster state management, load balance incoming requests, etc.

C.

A server node runs special workloads like Task Mining analysis, Document Understanding pipelines that require GPU capability, Automation Suite Robots, etc.

D.

A server node can host any of the UiPath products, shared components, or special workloads.

Full Access
Question # 25

Which of the following represents a valid sequence for a multi-node installation?

A.

Configure disks -- > Generate cluster config -- > Install infrastructure

B.

Install RPM packages -- > Configure disks -- > Join agent nodes

C.

Access servers -- > Join server nodes -- > Validate prerequisites

D.

Install Fabric -- > Configure registry -- > Prepare servers

Full Access
Question # 26

Which sequence of actions is correct for manually restarting a node in an Automation Suite cluster while keeping the cluster healthy during maintenance?

A.

Drain the node, stop the Kubernetes agent process, kill all rke2 services and containers, then reboot the machine directly.

B.

Drain the node, stop the Kubernetes server and agent processes, kill all rke2 services, and reboot the machine using systemctl.

C.

Drain the node, stop the Kubernetes server and agent processes, and reboot the machine without killing any child processes.

D.

Drain the node, stop the Kubernetes server process, uncordon the node, and then stop the Kubernetes agent process.

Full Access
Question # 27

What is the minimum processor requirement for each cluster in a multi-node deployment?

A.

32 (v-)CPU/cores

B.

64 (v-)CPU/cores

C.

96 (v-)CPU/cores

D.

128 (v-)CPU/cores

Full Access
Question # 28

Which platforms are supported for deploying Automation Suite?

A.

Windows Server

B.

Any Kubernetes-based containerization platform

C.

Only OpenShift

D.

AKS, EKS, Openshift and RHEL Linux based clusters

Full Access
Question # 29

Which of the following statements is true when Document Understanding is enabled in an offline installation?

A.

Offline bundle for ML Packages is by default added when enabling Document Understanding.

B.

Offline bundle for ML Packages will be downloaded from the UiPath online repository.

C.

Offline bundle for ML Packages is not required for using Document Understanding.

D.

Get the offline bundle for ML Packages to one of the servers nodes.

Full Access
Question # 30

How are the two Automation Suite clusters administered in a multi-site deployment?

A.

They share a single configuration.

B.

They are managed independently.

C.

They are managed by a central control system.

D.

One cluster manages the other.

Full Access
Question # 31

When upgrading to a new Automation Suite version, in which situations is an additional license required?

A.

No additional license is required during the Automation Suite upgrade.

B.

An additional license is required only during side-by-side upgrade.

C.

An additional license is required, independent of the upgrade method used.

D.

An additional license is required when you perform a clean upgrade.

Full Access
Question # 32

Which of the following statements is accurate when deploying the Orchestrator service in Automation Suite?

A.

Only SQL server Enterprise editions are supported

B.

Requires SQL Server version 2019 or higher for optimal performance

C.

Requires a dedicated Microsoft SQL Server 2016, 2017, 2019, and 2022 Standard and Enterprise editions

D.

Orchestrator does not require an SQL server because it is deployed as a service as part of Automation Suite

Full Access
Question # 33

Which type of DNS resolution is needed for Automation Suite?

A.

Forward and reverse DNS resolution

B.

Host file mapping

C.

Proxy DNS tunneling

D.

Static IP entries only

Full Access
Question # 34

For a complete product selection, what minimum data-disk capacity is required for both single-node and multi-node deployments?

A.

256 GiB SSD

B.

512 GiB SSD

C.

1 TB SSD

D.

2 TB SSD

Full Access
Question # 35

What is the minimum additional storage needed to enable package caching for the Automation Suite Robots node in a multi-node HA-ready production environment?

A.

5 GiB

B.

10 GiB

C.

20 GiB

D.

50 GiB

Full Access