Last Chance Black Friday Deal: Take 75% Off! Use coupon code below to secure your exam bundles! - Ends in 0d 00h 00m 00s - Coupon code: my75ex

Home > HP > HPE Networking > HPE7-A12

HPE7-A12 HPE Network Data Center Professional Architect Exam Question and Answers

Question # 4

To prepare for a data center network implementation, you asked a customer for a list of VLANs to support. The customer’s list for several VMware ESXi hosts includes 4095.

What follow-up question should you ask?

A.

Is VLAN 4095 associated with the same subnet on all of those hosts?

B.

What VLAN tags do the VMs connected to the 4095 port group use?

C.

Is the customer using NSX to support this non-standard VLAN?

D.

Because this VLAN ID is reserved for the system on CX switches, is the customer open to changing that VLAN ID?

Full Access
Question # 5

Waratah Hospital, located in Australia, plans to relocate many data-center services to a new facility. (The remaining legacy data center is not included in this project.) Waratah Hospital has engaged an external consultant to help design the new data-center network.

Based on the data-center network-infrastructure requirements, the external consultant has produced a high-level design. The design document is summarized below.

Requirements and information:

Six racks in the data-center room (a single row).

Redundant top-of-rack leaf switches with back-to-front cooling in every rack, delivering 10/25-Gbps connectivity to servers, storage, and other devices.

Four 100-GbE uplinks per leaf switch.

The customer requested that all switch ports face the rear of the rack racks (hot aisle).

OOB management for servers, storage, and network devices must be provided through an external switch with back-to-front cooling. This switch must be included in the solution. One OOB switch provides connectivity for two racks.

Core equipment for the OOBM network is being reused.

Middle-of-row spine switches.

The data center must connect to the hospital building through links providing 400 Gbps.

Internet access is supplied through an existing firewall cluster containing two firewalls, with one firewall in each data room. The second firewall operates in standby mode, and VRRP is used for firewall failover. The data-center network must connect to these firewalls through links totaling 100 Gbps.

The external link is a dark-fiber direct link using single-mode fiber (OS2). The distance to the main hospital is 1.5 KM. The links will terminate on two core switches in the hospital.

The customer additionally requires:

99.999% uptime for this life-critical environment.

Planned and unplanned downtime must be minimized.

Software upgrades are permitted only once per year, with close to zero downtime.

All life-critical resources are accessed locally, and all resources reside within the hospital campus.

Waratah Hospital requires a highly secure data-center environment. Encrypted wire-speed connectivity between the data room and hospital is mandatory because the inter-building link crosses a public road.

Waratah Hospital has a mixture of virtualized (vSphere) servers, Nutanix storage, bare-metal servers, backup servers, and other devices.

Previously, the hospital experienced a security breach that caused data loss, network downtime, and identity theft.

Refer to the scenario. You have learned that the customer must extend two VRFs between the new data-center facility and the hospital. To meet the scenario requirements and general best practices, what should you recommend to connect border leaf switches to the hospital core?

A.

8x 50Gbps links that are all routed only ports (ROPs). These ports establish two full meshes between two border leaf switches and two hospital core switches.

B.

4x 100 Gbps links that are routed only ports. Border leaf switch 1 has two ports that connect to hospital core switch 1. Border leaf switch 2 has two ports that connect to hospital core switch 2.

C.

4x 100 Gbps links, establishing a full mesh between two border leaf switches and two hospital core switches. Each link should have two subinterfaces acting as routed only ports.

D.

8x 50Gbps links that establish two full meshes between two border leaf switches and two hospital core switches. The 4 links that connect to the hospital core 1 in one VSX LAG, and the other 4 links are in another VSX LAG.

Full Access
Question # 6

You are recommending HPE Aruba Networking Central to a customer. Which customer requirement can be met only with an AAS license rather than an AAE license?

A.

The customer requires a license that supports AI Insights for CX 8325 and CX 9300 switches.

B.

The customer has budget available to pay for a full 3-year license as part of the initial payment for the networking solution.

C.

The customer is purchasing some licenses now and more licenses in a few months and would like the option to have the term end for all the licenses.

D.

The customer is just getting acquainted with HPE Aruba Networking Central and wants to start with a 1-year license.

Full Access
Question # 7

Which information is likely to appear in the device-inventory deliverables? Choose two.

A.

RMA instructions

B.

migration Gantt charts

C.

device IP address

D.

device name

Full Access
Question # 8

A customer’s legacy three-tier architecture is being modernized with an L3 spine-and-leaf topology. The CX switches in the topology will supply the overlay. The customer data center has six VRFs. The customer has requested service leaf switches to connect to two clustered firewalls that route and filter traffic between the VRFs.

How can the efficiency of traffic flow between subnets in the same VRF be maximized?

A.

Use the centralized gateway model for these subnets, selecting a different centralized gateway for each VRF

B.

Within each VRF, use the distributed gateway (L3 anycast) model for most subnets but the centralized gateway design for the subnets with the highest security needs

C.

Use the firewall cluster as centralized gateways for these subnets

D.

Use the distributed gateway (L3 anycast) model for these subnets

Full Access
Question # 9

Waratah Hospital, located in Australia, plans to relocate many data-center services to a new facility. The remaining legacy data center is outside this project’s scope. Waratah Hospital engaged an external consultant to help design the new data center network.

Based on the data center network-infrastructure requirements, the external consultant created a high-level design. The design document is summarized below.

Requirements and information:

Six racks in the data center room, arranged in a single row.

Redundant top-of-rack leaf switches with back-to-front cooling in every rack, delivering 10/25 Gbps connectivity for servers, storage, and other devices.

Four 100 GbE uplinks per leaf switch.

The customer requested that all switch ports face the rear of the racks (the hot aisle).

OOB management for servers, storage, and network devices must be provided through an external switch with back-to-front cooling. This switch must be included in the solution. One OOB switch provides connectivity for two racks.

Core equipment for the OOBM network is being reused.

Middle-of-row spine switches.

The data center must connect to the hospital building using links that provide 400 Gbps.

Internet access is supplied through an existing firewall cluster with two firewalls, with one firewall in each data room. The second firewall operates in standby mode, and VRRP is used on the firewalls for failover. The data center network must connect to these firewalls with links totaling 100 Gbps.

The external link is a direct dark-fiber link based on single-mode fiber (OS2). The distance to the main hospital is 1.5 KM. The links will terminate on two core switches in the hospital.

The customer also requires:

99.999% uptime for this life-critical environment.

Planned and unplanned downtime must be minimized.

Software upgrades are permitted only once per year, with close to zero downtime.

All life-critical resources are accessed locally, and all resources are located within the hospital campus.

Waratah Hospital requires a highly secure data center environment. Encrypted wire-speed connectivity between the data room and the hospital is mandatory because the link between the buildings crosses a public road.

Waratah Hospital has a mixture of virtualized (vSphere) servers, Nutanix storage, bare-metal servers, backup servers, and other devices.

The hospital previously experienced a security breach that caused data loss, network downtime, and identity theft.

Which valid assumptions can be made for this scenario when preparing the network design documentation? Choose two.

A.

Sufficient virtualization resources for the deployment of software will be available.

B.

The customer ' s staff can implement the project.

C.

The customer ' s budget for the project will be met.

D.

Sufficient cabling between data centers will be available.

E.

Hardware delivery will meet project timelines.

Full Access
Question # 10

You have designed an L3 spine-and-leaf topology for a customer’s highly virtualized VMware vSphere data center. The customer already uses HPE Aruba Networking mobility and switching solutions in the campus. You are recommending CX 8325 and CX 9300 switches and Fabric Composer. The customer asks you to justify the cost of the Fabric Composer licenses.

What should you explain?

A.

This solution enables the customer to monitor the data center and campus solutions from the same cloud console, eliminating travel costs.

B.

This solution ' s deep integration with vSphere saves IT time and eliminates costly errors with features like automatic VLAN provisioning.

C.

This solution ' s integration with ITSMs such as ServiceNow helps customers troubleshoot more quickly.

D.

This solution uses agentic AI to run the network automatically, reducing IT operational costs.

Full Access
Question # 11

Waratah Hospital, located in Australia, plans to relocate many data-center services to a new facility. (The remaining legacy data center is outside this project’s scope.) Waratah Hospital has engaged an external consultant to help design the new data-center network.

Based on the data-center network-infrastructure requirements, the external consultant has produced a high-level design. The design document is summarized below.

Requirements and information:

Six racks in the data-center room (a single row).

Redundant top-of-rack leaf switches with back-to-front cooling in every rack, delivering 10/25 Gbps connectivity to servers, storage, and other devices.

Four 100 GbE uplinks per leaf switch.

The customer requested that all switch ports face the rear of the racks (the hot aisle).

OOB management for servers, storage, and network devices must be delivered through an external switch with back-to-front cooling. This switch must be included in the solution. One OOB switch provides connectivity for two racks.

Core equipment for the OOBM network is being reused.

Middle-of-row spine switches.

The data center must connect to the hospital building through links providing 400 Gbps.

Internet access is supplied through an existing firewall cluster with two firewalls, one in each data room. The second firewall operates in standby mode, and VRRP is used for firewall failover. The data-center network must connect to these firewalls with links totaling 100 Gbps.

The external link is a single-mode-fiber (OS2) dark-fiber direct link. The distance to the main hospital is 1.5 KM. The links will terminate on two core switches in the hospital.

The customer also requires:

99.999% uptime for this life-critical environment.

Planned and unplanned downtime must be minimized.

Software upgrades are permitted only once per year, with close to zero downtime.

All life-critical resources are accessed locally, and all resources are within the hospital campus.

Waratah Hospital requires a highly secure data-center environment. Encrypted wire-speed connectivity between the data room and the hospital is mandatory because the link between the buildings crosses a public road.

Waratah Hospital has a mix of virtualized (vSphere) servers, Nutanix storage, bare-metal servers, backup servers, and other devices.

Previously, the hospital experienced a security breach that caused data loss, network downtime, and identity theft.

Refer to the scenario. You are deciding between the CX 9300 and CX 8325 switches for the border leaf switches. Which hard customer requirement affects this decision?

A.

The need to minimize downtime during software upgrades

B.

Hardware encryption on the links to the hospital

C.

The mixed speed requirements to connect to both the hospital and the internet firewall

D.

The bandwidth requirements on the links to the hospital

Full Access
Question # 12

Refer to the exhibit.

You are designing a data-center network. The customer requests connectivity between the data center and campus core switches. The customer uses VLANs for segmentation, but does not use VRFs.

What is the recommended design for the links between the data-center core switches and the campus core switches?

A.

Each link should be a routed-only port (ROP) in a /31 subnet.

B.

Link 1 and Link 3 should be one VSX LAG. Link 2 and Link 4 should be another VSX LAG.

C.

All links should be in the same VSX LAG.

D.

Link 1 and Link 2 should be one VSX LAG. Link 3 and Link 4 should be another VSX LAG.

Full Access
Question # 13

You have designed a spine-and-leaf topology containing 16 leaf switches and four spine switches. The customer does not have an existing overlay solution. You are helping the implementer work with the customer to obtain IP address blocks for the design. You plan to request these /24 subnets:

    One for an individual loopback interface on each switch.

    One for point-to-point connections between leaf and spine switches.

What is one correction you must make?

A.

Change the /24 subnet request for the point-to-point links to a /23 subnet

B.

Change the /24 subnet request for the individual loopback addresses to a /25 subnet

C.

Ask for another subnet for point-to-point links in the overlay VRF

D.

Ask for another subnet for loopback IP addresses shared by the two members of each VSX pair

Full Access
Question # 14

You have designed a two-tier L2 data center network for a customer. While presenting the solution, the customer states that they have a mission-critical multicast application with sources and receivers in the data center.

Which CX feature, in addition to features supplied by the PIM-SM standard, should you explain to emphasize the value of your solution?

A.

PIM-SM active-active with VSX which enables near instant failover for multicast streams if one core switch fails

B.

VSX active forwarding, which enables multiple switches to act as PIM-SM active designated routers at the same time

C.

Fast switchover from the RP tree to the shortest path tree

D.

Bootstrap router (BSR) support, which makes the solution more automated and resistant to link failures

Full Access
Question # 15

You have been asked to help design an HPE Aruba Networking CX network solution that connects AI servers to file storage. The solution must support NFS over RDMA and deliver 400 GbE links to the edge. The current design uses leaf and spine switches that carry all traffic in VXLAN tunnels. Every switch is a CX 9300-32D switch.

What is one correction you should make to the design?

A.

Redesign the solution to carry traffic without VXLAN to ensure support for DCB

B.

Continue to use CX 9300-32D switches for the spine but use CX 9300S switches as leaf switches to optimize costs

C.

Replace the CX 9300-32D switches with CX 9300S switches to ensure support for RoCEv1/v2

D.

Eliminate the spine to establish a rail-only topology

Full Access
Question # 16

Waratah Hospital, located in Australia, plans to relocate many data-center services to a new facility. (The remaining legacy data center is outside the scope of this project.) Waratah Hospital has engaged an external consultant to help design the new data-center network.

Based on the data-center network-infrastructure requirements, the external consultant has produced a high-level design. The following summarizes the design document.

Requirements and information:

Six racks in the data-center room (a single row).

Redundant Top-of-Rack leaf switches with back-to-front cooling in every rack, delivering 10/25 Gbps connectivity for servers, storage, and other devices.

Four 100 GbE uplinks per leaf switch.

The customer requested that all switch ports face the back of the racks (hot aisle).

OOB management for servers, storage, and networking must be delivered through an external switch with back-to-front cooling. This switch must be included in the solution. One OOB switch provides connectivity for two racks.

Core equipment for the OOBM network is being reused.

Middle-of-row spine switches.

The data center must connect to the hospital building through links providing 400 Gbps.

Internet access is supplied through an existing firewall cluster with two firewalls, with one firewall in each data room. The second firewall runs in standby mode, and VRRP is used on the firewalls for failover. The data-center network must connect to these firewalls using links totaling 100 Gbps.

The external link is a dark-fiber direct link using single-mode fiber (OS2). The distance to the main hospital is 1.5 KM. The links will terminate on two core switches in the hospital.

The customer also requires:

99.999% uptime for this life-critical environment.

Planned and unplanned downtime must be minimized.

Software upgrades are permitted only once per year with close to zero downtime.

All life-critical resources are accessed locally, and all resources reside within the hospital campus.

Waratah Hospital requires a highly secure data-center environment. Encrypted wire-speed connectivity between the data room and the hospital is mandatory because the link between the buildings crosses a public road.

Waratah Hospital has a mix of virtualized (vSphere) servers, Nutanix storage, bare-metal servers, backup servers, and other devices.

Previously, the hospital experienced a security breach that caused data loss, network downtime, and identity theft.

In this scenario, the customer servers are HPE Servers. For the iLO ports, you propose one 6300M switch per rack. What is the best practice for connecting these switches to the data-center data plane?

A.

You should connect these switches to the spine.

B.

You shouldn ' t connect these switches to the data center data plane.

C.

You should connect to the ToR switches in each rack.

D.

You should connect these switches to the border leaf.

Full Access
Question # 17

A customer operates a highly virtualized data center for which you are designing a two-tier Layer 2 data center.

What are the characteristics of a design that extends VLANs only to the ToR switches and server ports that strictly require those VLANs? Choose two.

A.

smaller MAC address tables at the access switches

B.

smaller routing table on core switches

C.

more flexibility for server admins

D.

more control for network admins

E.

smaller ARP tables on the core switches

Full Access
Question # 18

You are designing a pair of CX switches to function as ToR switches. The switches use VSX in a data-center Layer 2 topology and connect to the core through VSX LAGs. To satisfy expansion requirements, you must keep as many ports available as possible.

Which option should you recommend for VSX keepalives?

A.

Sending the keepalives to and from loopback interfaces over the uplinks to the core.

B.

Adding a link between the switches dedicated to the keepalives.

C.

Sending the keepalives to and from loopback interfaces over the VSX ISL.

D.

Using the OOBM interface to transmit keepalives.

Full Access
Question # 19

A customer currently has a data-center network using CX switches and Pensando for east-west firewalling. The data center is highly virtualized with VMware, but the customer is considering migrating some workloads to HPE VMs running on HPE Morpheus VM Essentials (VME).

What should you explain?

A.

The customer will not be able to implement microsegmentation between the HPE VMs on the same subnet, but can implement segmentation between VMs on different subnets.

B.

The customer should use the VME DSS plug-in to utilize the full firewall features, including microsegmentation.

C.

The customer will not be able to implement the east-west firewall policies for traffic originating from the HPE VMs, but can continue to use the legacy policies to secure other data center traffic.

D.

The customer should purchase the HPE Morpheus Enterprise license to enable support for PVLAN and the full firewall features, including microsegmentation.

Full Access
Question # 20

What is the recommended practice for using VSX at the core of a two-tier design?

A.

You should implement VSX at the core when the access layer operates at layer 2 only.

B.

You should never implement VSX at the core of a two-tier design.

C.

You should implement VSX at the core when the access switches implement EVPN VXLAN.

D.

You should implement VSX at the core when the access is layer 3 only with OSPF routed traffic forwarding between core and access.

Full Access
Question # 21

You are planning a network upgrade for a VMware-virtualized data center. The customer already uses NSX. You are responsible for the CX switch design, and the customer is responsible for the NSX design.

What is one topic to discuss for the logical design?

A.

Whether the customer has a particular scheme they prefer for mapping VLANs to VNIs.

B.

What routing is required between subnets inside and outside the overlay.

C.

How to correlate isolated VLAN IDs with primary VLAN IDs and whether to permit any traffic between isolated VLAN endpoints.

D.

Into how many VRFs would the customer needs to segment the overlay networks.

Full Access