H11-851_V3.0 HCIA-Video Conference V3.0 Question and Answers

What is the following statement about KU resource pools correct?

A company is now going to hold a provincial seminar that requires the City A Convention Center and the City B Conference Center to join in. A City Convention Center commonly uses the A meeting

template to hold meetings, and the center commonly uses the B meeting template to hold meetings. From the perspective of feasibility and ease of operation, ( ).

ideo input 2 can be used as a TE60 secondary input interface, but video input 3 cannot().

IdeaHub is an intelligent terminal product integrating intelligent writing, ultra-clear projection screen, video conferencing, and open office applications, which can meet the smart office needs of enterprise

conference rooms, management rooms, open office areas and other scenarios. ( )

MCU system backup can be divided into hardware backup and data backup. ()

H.323 Which organization developed the standard ().

When a meeting operation is performed on SMC3.0, the () operation takes effect for the entire meeting and not for a single venue.

In the case of multiple MCUs cascading, the ( ) feature enables the upper venue to browse the lower venue screen across levels.

The essence of the MCU call local terminal is the peer-to-peer call process. ()

The product type selected when upgrading the codec of Huawei TP Series Zhizhen products is ().

The troubleshooting methods provided by IdeaHub mainly include ( ).

In the following video, the smoothest picture is ().

Video with a frame rate of 30f/s

Video with a frame rate of 60f/s

Video with a frame rate of 50f/s

Video answer at a frame rate of 25f/s

Remote video loopback, loopback video stream through the far end of the codec processing. ()

Users cannot initiate a multipoint conference through huawei video conferencing terminals.

Regarding SMC3.0 conference room distribution, is the following description correct?

You need to set the GK name when making a point-to-point call . ()

In T1, T2, T3, T4 four-point meetings using the 96XX Series MCUs, manually set up the venue T1 After T2 and T3 form three screens, after the venue T1 leaves the meeting, the position of the atomic

screen T1 will be ().

The venue network is normal, the MCU can be connected normally through the IP address of the MCU, but the MCU IVR access number cannot be accessed by dialing the MCU, the possible reason is that

the MCU cannot be accessed.

( ) The device is responsible for sending the broadcast venue screen to other venues.

TE40 supports a PSTN interface where you can connect a phone to a conference over voice ().

Regarding the gallery view in a multi-stream meeting, what is the following description incorrect? ()

Is the following description of the VP98 Series MCUs correct?

By loading licenses, you can expand the capacity of the MCU and extend the functionality with business features. ()

When logging in to the SMC2.0 operating system for the first time, the default user name of the system administrator is admin, and the password is Chang_Me. ()

The caller set does not require a GK to call directly with an IP address.

H.323 is a standard developed by ( ).

Transactions are mainly divided into four categories: INVITE transactions, non-INVITE transactions, ACK transactions and CANCEL transactions.

The signaling interaction between the terminal and GK uses Huawei's proprietary protocol. ()

SIP is an application layer protocol, independent of the following transport layer protocols, can be hosted on different transport protocols, such as UDP/TCP/TLS, currently the most commonly used TCP. ()

Among the following terminal products, ( ) belongs to Zhizhen terminal.

During SVC conferences, the terminal sends up to the MCU( ) code stream, including secondary streams and mainstream streams, with resolutions between 90p and 720p.

The HD terminal turns on the multi-view function, connects two cameras as video inputs, and the terminal mixes the two videos into one video. ()

() Does not belong to the three elements of video conferencing multimedia business.

SIP messages are encoded as text.

484.H.323 Entities include ( ).

The RSE6500 supports 1080P 60 dual-stream recording, live streaming, and on-demand ().

The single board of the VP96 series MCUs includes ( ).

Terminal T1 calls terminal T2's number 002 and cannot successfully establish the call for possible reasons ().

The service processing board cannot play the role of the main control board, and the service backup function of the business board can be realized by configuring multiple business boards. ()

In cascading meetings, meeting control operations on subordinate venues are not supported. ()

The sample rate used by the 340.G.728 audio algorithm is () KHZ.

A CANCEL transaction can only be sent after receiving a temporary response from INVITE (including 100), before the final response. ()

In video conferencing, the () feature enables participant terminals with different capabilities to display secondary stream data information

IdeaHub has the ultimate whiteboard experience, which mainly includes ().

The function of the redirect server is to map the addresses in the request to zero or more new addresses, which are returned to the client. ()

96XX Series MCUs When configured to support FECC DTMF remote control, you need to press the () key before you can control the camera.

E1 line dedicated, stable and reliable performance, high security, low price, simple wiring.

In the conference call flow, the tasks of the H.245 Competency Negotiation section are ().

Once IdeaHub is successfully activated, you can join a scheduled meeting with () one click.

Regarding the service area resources configured by SMC3.0, the following description error is ().

The RSE6500 repackaged the corresponding high/standard-clear on-demand files and sent them to the conference terminal via the () protocol. ()

The 338.96XX family of MCUs can be upgraded using ().

In H.323, the Terminal Control and Management class functions as a multi-selector

Gateway enables translation between numbers, names, etc., and IP addresses. ()

Regarding the multi-vision function, what is the following description incorrect? ( )

Which of the following interfaces supports audio signals ().

Data conferencing is a kind of conference business provided by the conference system, the following description of data conferencing is correct? ()

The first step in the signaling process of the call set is for the terminal to send a meeting request to GK. ()

The VP98 series MCUs are multimedia switching platforms based on Huawei's self-developed Kunpeng chips and () operating systems.

McUs are registered with H.323 and need to make a request to Gk when calling a terminal using a number. ()

The point-to-point call rate is 2M, if the bandwidth is not reserved, the bandwidth of the main video is close to 2M before sending the dual stream, and after the dual stream is sent, the main video bandwidth

is reduced, and part of the bandwidth is shared with the dual stream. ()

When SMC2.0 adds a manageable venue, the SNMP V3 user authentication parameters must be consistent with here on the venue side, otherwise the venue will fail to go live. ()

172.Q.931 The signaling port is a UDP port. ()

The MCU of the 96XX series supports 5 backups such as power supply, chip, service board, network port, and main control board to ensure that the MCU can run stably for a long time without interruption

().

In the MCU built-in web page of the Settings Management Export item, the following cannot be exported is ().

The FE port on the front panel of the MCU is ().

( ) Only unmanageable additions to SMc2.0 are supported.

Address resolution is when an SC performs a translation of the IP address of an entity ( ) .

The SMC2.0 Unified Access number defaults to 168

() is a function of the whiteboard.

LRQ means ().

Regarding SMC3.0 conference control, the following statement is incorrect?().

The following description of the Adhoc meeting is incorrect ().

The network traversal modes supported by the 96XX series MCUs are ().

By logging in to the SMC3.0 admin admin as a conference administrator, you can add an MCU. ()

Main venue: The venue where the largest number of participants is located. ()

Ad hot meeting rooms are a way to activate a meeting and join a meeting via the () side.

Regarding CloudRSE, is the following description correct?