Black Friday Sale Special - Limited Time 70% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: mxmas70

 
Home > EMC > Storage Administrator > D-PST-OE-23

D-PST-OE-23 Dell PowerStore Operate 2023 Exam Question and Answers

Question # 4

Which account credentials are needed to run diagnostic commands?

A.

root

B.

service

C.

console

D.

admin

Full Access
Question # 5

What is the result of setting a VLAN ID of 0 on a network when running ICW for Dell PowerStore?

A.

Network will pass tagged traffic

B.

Static route is set

C.

Network will pass untagged traffic

D.

Default route is set

Full Access
Question # 6

While on-site troubleshooting a Dell PowerStore system, the node Ð’ embedded module fault LED is blinking blue and amber alternating at one second intervals. What does this indicate?

A.

Node is in degraded mode

B.

Node is booting

C.

Node is on service mode

D.

System is not initialized

Full Access
Question # 7

A Storage Administrator needs root access. What command needs to be run?

A.

svc_inject generate-key --root

B.

svc_inject -root

C.

sudo service

D.

su - root

Full Access
Question # 8

What is a step in configuring the ToR data switches for a Dell PowerStore T?

A.

Configure a port for the discovery laptop

B.

Create VLANs for NAS servers

C.

Create VLAN for vMotion networks

D.

Configure ports for management on native VLAN

Full Access
Question # 9

A Storage Administrator has just installed PSTCLI on a Linux client. The administrator is unfamiliar with the PSTCLI command list. How can the administrator get a list of all PSTCLI commands from the cli> prompt?

A.

Type the +keys together

B.

Press the key

C.

Use the show all command

D.

Use the help all command

Full Access
Question # 10

What describes the ICM and ICD networks?

A.

Address type is dynamic and automatically reconfigured on discovery results

B.

They are NOT encrypted

C.

Address type is persistent throughout the life of the cluster and CANNOT to be modified

D.

They are encrypted with IPsec

Full Access
Question # 11

What is an alternative way to collect logs instead of using the Dell PowerStore manager GUI?

A.

Data Collect using Service Container

B.

USB stick inserted into the system

C.

Data Collect using vCenter

D.

Discovery Utility

Full Access
Question # 12

A Storage Administrator notices a Major alert present in Dell PowerStore Manager relating to data protection. What action within the alert details slide-out panel is helpful in troubleshooting the data protection problem?

A.

View the Associated Events for earlier related alerts

B.

Examine Notifications to obtain a list of corrective actions

C.

Acknowledge the alert to clear and resolve the problem

D.

Access the Repair Flow link to schedule a support engagement

Full Access
Question # 13

Which component is a CRU?

A.

Base enclosure

B.

Expansion enclosure

C.

Battery Backup Unit

D.

Nodes

Full Access
Question # 14

Which component is hot-swappable?

A.

SFP

B.

Fan

C.

BBU

D.

Expansion IO module

Full Access
Question # 15

What is achieved when the Rapid Spanning Tree Protocol (RSTP) is enabled on a Dell PowerStore network configuration?

A.

Redundant connectivity between data switches

B.

Communication between data switches and management switch on PowerStore T

C.

Management between appliance and vCenter on PowerStore X

D.

Fault tolerance between appliances in a PowerStore cluster

Full Access
Question # 16

Refer to the exhibit.

What type of cable is used for the ToR switch configuration shown for the S5248F-ON switches?

A.

10 GigE Cat 6 Ethernet RJ-45

B.

25 GigE Twinax

C.

100 GigE QSFP28

D.

10 GigE SFP optical cable

Full Access
Question # 17

How many nodes are in the base enclosure?

A.

2 nodes configured as Active-Standby

B.

1 node with duel connectivity

C.

1 node with high availability enabled

D.

2 nodes configured as Active-Active

Full Access
Question # 18

How is a service laptop IP configured to connect to the Service LAN port of a Dell PowerStore node?

A.

Static IP: 128.221.1.249 and netmask: 255.255.255.0

B.

Obtain IP address from DHCP on PowerStore

C.

Static IP: 169.254.1.249 and netmask: 255.0.0.0

D.

Leave IP address and netmask unconfigured

Full Access
Question # 19

When a Dell PowerStore node powers up in service mode, what are the commands and sequence used from the appliance SSH client to restore the node back to normal?

A.

svc_rescue_state clear

svc_node reboot

B.

svc_node restart

svc_rescue_state start

C.

svc_rescue_state normal

svc_node start

D.

svc_node shutdown

svc_rescue_state clear

Full Access
Question # 20

While on-site installing a Dell PowerStore system, the node A and Ð’ embedded module fault LEDs are alternating blue and amber (blue for 3 seconds). What does this indicate?

A.

The system is booting

B.

Nodes are in service mode

C.

The system is not initialized

D.

Nodes are in degraded mode

Full Access
Question # 21

Match the base enclosure SAS ports in column A to their corresponding expansion LCC ports in column B; when connecting a PowerStore base enclosure to a single expansion enclosure.

Full Access
Question # 22

A Storage Administrator needs to connect through SSH to run svc commands. How is the SSH session configured?

A.

Appliance IP address using port 22

B.

NAS server IP address using port 26

C.

NAS server IP address using port 22

D.

Appliance IP address using port 26

Full Access
Question # 23

A Storage Administrator wants to upgrade a two appliance Dell PowerStore cluster. Which Commit options need to be chosen to have all appliances upgraded in the last step?

A.

Appliance, Cluster

B.

Appliance, Appliance

C.

Cluster, Appliance

D.

Cluster, Cluster

Full Access
Question # 24

Match the correct non-disruptive upgrade process step (answer column) with the correct sub-step (match column).

Full Access
Question # 25

What describes the power requirements for Dell PowerStore?

A.

Lower model numbered systems require less AC line current than higher model numbered systems

B.

T models require less total power than X models

C.

X models require less total power than T models

D.

Lower model numbered systems require less input voltage (VAC) than higher model numbered systems

Full Access
Question # 26

What does the command “svc_journalctl | grep ‘Mar 25 23:00’” do?

A.

Ignores log messages from the specified date

B.

Retrieves log messages from the specified date

C.

Deletes all logs before the specified date

D.

Rotates the log based on the specified date

Full Access
Question # 27

The “svc_rescue_state list” shows a node in service mode. How can the node be returned to normal mode?

A.

svc_rescue_state normal

B.

svc_rescue_state clear

C.

svc_rescue_state exit

D.

svc_rescue_state quit

Full Access
Question # 28

When connecting a PowerStore base enclosure to 2 expansion enclosures, match the base SAS ports in column A to their corresponding expansion LCC ports in column B.

Full Access
Copyright myexamcollection.com. All Right Reserved.