Nutanix NCP-MCI-6.10 Exam Dumps - Actual Questions Answers

In a dark site deployment, LCM does not automatically fetch updates from the internet. The administrator must manually upload compatibility bundles.

Option B (The latest compatibility bundle has not been uploaded) is correct:

Thecompatibility bundlecontainsfirmware mappings, allowing LCM to detect the correct BIOS version.

Option A is incorrect:

AOSdoes not need to be upgraded firstfor a BIOS update.

Option C is incorrect:

TheBMC firmware does not always need updatingbefore BIOS updates.

Option D is incorrect:

In a dark site deployment,LCM does not rely on an internet connection, so webserver access is not required.

The Nutanix ECA course addresses Metro Availability, a high-availability feature that provides synchronous replication between two Nutanix clusters for zero Recovery Point Objective (RPO) and near-zero Recovery Time Objective (RTO). The NCC warning about thebreak_replication_timeoutbeing below the recommended minimum indicates a configuration issue that could affect the stability of Metro Availability. Thebreak_replication_timeoutparameter determines how long the Protection Domain (PD) waits before breaking replication if connectivity between the Metro clusters is disrupted.

Extract from Nutanix Enterprise Cloud Administration (ECA) Course Documents:

Module: Data Protection, Section: Metro Availability Configuration"Metro Availability uses synchronous replication to ensure data consistency between two clusters. The break_replication_timeout parameter defines the timeout period for replication. The recommended minimum value is 15 seconds to prevent premature replication breaks due to transient network issues."

Module: Nutanix Cluster Check (NCC), Section: Metro Availability Alerts"An NCC warning indicating that the break_replication_timeout for a Metro Protection Domain is below the recommended minimum suggests the timeout is too low, risking unnecessary replication breaks. The recommended setting is 15 seconds to balance stability and responsiveness in Metro Availability setups."

Explanation of Options:

A. Update the break_replication_timeout to 10 secondsThis is incorrect. A timeout of 10 seconds is below the recommended minimum of 15 seconds, as specified in the ECA course. Setting the timeout too low increases the risk of replication breaking due to transient network latency or jitter, which could disrupt Metro Availability and cause unnecessary failovers. The ECA documentation warns:"A break_replication_timeout below 15 seconds may lead to frequent replication breaks, reducing the reliability of Metro Availability."

B. Update the break_replication_timeout to 5 millisecondsThis is incorrect. A timeout of 5 milliseconds is far too low and impractical for Metro Availability, as even minor network delays would trigger replication breaks. The ECA course does not support millisecond-level timeouts and explicitly recommends 15 seconds as the minimum. Such a low value would destabilize the Metro setup, as noted:"Extremely low timeout values are not supported, as they cause replication to break under normal network conditions."

C. Update the break_replication_timeout to 15 millisecondsThis is incorrect. A timeout of 15 milliseconds is still significantly below the recommended minimum of 15 seconds. Similar to option B, this setting would cause replication to break too quickly, undermining the purpose of Metro Availability. The ECA course clarifies:"Timeouts in milliseconds are not recommended for Metro Availability, as they do not account for typical network latency in synchronous replication setups."

D. Update the break_replication_timeout to 15 secondsThis is the correct answer. The ECA course explicitly recommends abreak_replication_timeoutof 15 seconds as the minimum to ensure Metro Availability remains stable. This value allows the system to tolerate transient network issues without prematurely breaking replication, maintaining data consistency and availability. The NCC warning indicates the current timeout is below this threshold, and updating it to 15 seconds resolves the issue.

Supporting Extract:"To resolve NCC warnings about break_replication_timeout, set the value to 15 seconds using the ncli command: ncli pd update-metro-avail-pd name= break_replication_timeout=15. This ensures compliance with Nutanix best practices."

Additional Context from ECA:

Metro Availability Overview: Metro Availability synchronously replicates data between two clusters, typically within 100 km, to achieve zero RPO. Thebreak_replication_timeoutis a critical parameter that balances responsiveness to network issues with the need to avoid unnecessary replication breaks. The ECA course notes:"A timeout of 15 seconds is the default and recommended value to handle typical network fluctuations in Metro setups."

NCC Warning Resolution: The NCC (Nutanix Cluster Check) monitors cluster health and flags configurations that deviate from best practices. The warning aboutbreak_replication_timeoutindicates a risk to Metro Availability stability, and setting it to 15 seconds aligns with Nutanix recommendations.

Supporting Reference from Web Results:

The Nutanix Support Portal (https://portal.nutanix.com) confirms the ECA guidance: "For Metro Availability, the break_replication_timeout should be set to a minimum of 15 seconds to prevent replication breaks due to transient network issues, as flagged by NCC warnings."