Summer Special Limited Time 65% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: myex65

 
Home > Nokia > Nokia Service Routing Architect > 4A0-116

4A0-116 Nokia Segment Routing Exam Question and Answers

Question # 4

For any of the LFA methods to work properly, there must be a router in the backup path that will forward traffic addressed to the destination without sending it back to the source. Which of the following statements describes the way R-LFA selects such a router?

A.

It selects an immediate neighbor.

B.

It selects a remote router, reachable through a tunnel defined by a single Node-SID.

C.

It selects a remote router, reachable through a tunnel defined by a Node-SID and one or two Adjacency-SIDs.

D.

It can select an immediate neighbor or a remote router, as long as the backup path coincides with the path that will become active after IGP reconvergence.

Full Access
Question # 5

Which of the following is an advantage of enabling label stack reduction for a CSPF-calculated path, as compared to using plain CSPF?

A.

The number of hops included in the end-to-end path is reduced.

B.

The path calculation can be delegated to an external path computation element (PCE).

C.

There is a larger list of traffic-engineering constraint types that can be imposed on the LSP path.

D.

The routers in the calculated path can take advantage of ECMP to better distribute the traffic load.

Full Access
Question # 6

Which of the following statements about primary and secondary SR-TE LSP paths is FALSE?

A.

Only one LSP path forwards the traffic at any time,

B.

Up to three paths can be configured for a given SR-TE LS

C.

The primary path is always preferred over a secondary pa

D.

Preference values can be configured for non-standby secondary paths.

Full Access
Copyright myexamcollection.com. All Right Reserved.